Ground Joint Type Couplings

• Female Hose end
• This is made of 3 parts: Stem, Wing nut, and Female Spud
• Female Spud can be replaced with a Male Spud or a Double Spud
• * Denotes: Available in lightweight coupling upon request
• This part requires a 2 or 4 bolt clamp #4520 to secure to hose.
  • Sold as a separate item.

Sizes Available ID 3/8in. ID 1/2in.* ID 3/4in.* ID 1in.* ID 1-1/4in. ID 1-1/2in. ID 2in. ID 2-1/2in. ID 3in. ID 4in.

Buy Online Part 4518-03/GJ - Ground Joint Type Coupling Female spud only

• Female spud only
• * Denotes: Available in lightweight coupling upon request

Sizes Available ID 3/8in. ID 1/2in.* ID 3/4in.* ID 1in.* ID 1-1/4in. ID 1-1/2in. ID 2in. ID 2-1/2in. ID 3in. ID 4in.

• Male spud only
• * Denotes: Available in lightweight coupling upon request

Sizes Available ID 3/8in. ID 1/2in.* ID 3/4in.* ID 1in.* ID 1-1/4in. ID 1-1/2in. ID 2in. ID 2-1/2in. ID 3in. ID 4in.

• Double Spud
• * Denotes: Available in lightweight coupling upon request

Sizes Available ID 1/2in.* ID 3/4in.* ID 1in.* ID 1-1/4in. ID 1-1/2in. ID 2in. ID 2-1/2in. ID 3in.

• Male Hose end
• This part requires a 2 or 4 bolt clamp #4520 to secure to hose.
  • Sold as a separate item.

Sizes Available ID 3/8in. ID 1/2in.* ID 3/4in.* ID 1in.* ID 1-1/4in. ID 1-1/2in. ID 2in. ID 2-1/2in. ID 3in. ID 4in.

• Splicer
• This part requires two 2 or 4 bolt clamp Part #4520 (below) to secure to hose.
  • Sold as a separate item.

Sizes Available ID 1/2in. ID 3/4in. ID 1in. ID 1-1/4in. ID 1-1/2in. ID 2in. ID 2-1/2in. ID 3in.

• 2 or 4 bolt clamp
• These clamps are used to secure boss style male or female couplings to hose.
• Also used with Universal hose ends.

Sizes Available ID 3/8in. ID 1/2in.* ID 3/4in.* ID 1in.* ID 1-1/4in. ID 1-1/2in. ID 2in. ID 2-1/2in. ID 3in. ID 4in.

• Add on Male and Male, Male and Female Ground Joint, or Female Ground Joint and Female Ground Joint couplings to a high pressure steam hose or air hose to compute the total assembly price.
• Up to 3/4" size are attached with 2 bolt clamps.
• 1" through 2" are attached with 4 bolt clamps.

Sizes Available 1/2" MM 1/2" MF 1/2" FF 3/4" MM 3/4" MF 3/4" FF 1" MM" 1" MF 1" FF 1-1/4" MM 1-1/4" MF 1-1/4" FF 1-1/2" MM 1-1/2" MF 1-1/2" FF 2" MM 2" MF 2" FF

AUTOMOTIVE HOSES AND ACCESSORIES

BULK MATERIAL HOSES

CHEMICAL AND FUEL HOSES

CONTRACTORS HOSES

CONVEYOR BELTING

EXPANSION JOINTS

FIRE HOSES

FOOD GRADE HOSES

HOSE ATTACHMENTS

• Complete Hose Coupling Set
• Spanner Wrench Pin Lug Wrench
• Rubber Washers
• "King" Combination Nipples - Plated Steel
• Hose Menders
• Cam and Groove Couplings
• Universal Hose Couplings
• Sand Blast Couplings and Accessories
• Center Punch Band Clamps and Tools
• Junior Style, Band and Buckle Clamps, and Tools
• Ground Joint Type Couplings
• Brass Hose Fittings and Couplings
• Garden Hose Couplings and Fittings
• Air Hose Quick Couplers, Nozzle and Air Chuck
• Stainless Steel Hose Clamps
• Hi Torque Hose Clamps
• T-Bolt Hose Clamps
• Double Bolt Hose Clamps
• Spiral Hose Clamps
• Hose Strainers
• ASME Air Receiver Manifold
• Compressor "Y"
• Air Hose Fittings Safety Check Valves
• Hose Safety Whip-Check Cables
• Hose Swivel Couplers
• Ball Valves
• Tufftex-W Abrasion Hose Sleeving
• Pyrotex Knit Fire Hose Sleeve
• Pigstail Protective Hose Wraps

HOSES

• Industrial Hose - PVC Suction Discharge

HYDRAULIC HOSES AND FITTINGS

INDUSTRIAL HOSES

MARINE HOSE AND ACCESSORIES

FLOOR MATS

MOLDED RUBBER PRODUCTS

O-RINGS AND O-RING KITS

PIPE FITTINGS AND ADAPTERS

RUBBER CORD STOCK PRODUCTS

SHEET RUBBER PRODUCTS

STAIR TREADS RISERS FLOOR TILE ADHESIVE

TUBING - RUBBER AND PLASTIC

V-BELTS - CONVENTIONAL, FRACTIONAL HORSEPOWER, VARIABLE SPEED

Aeromat® is a registered trademark of the Aeromat Corporation
LITE-STEP® is a registered trademark of Ace Hose and Rubber Company
KOROLITE® is a registered trademark of Ace Hose and Rubber Company