A New Design Nose - will easily adjust and adhere to steps with return angle nosings between 90 degrees and 60 degrees; allows good fit on stairways designed for safety or aesthetics. Medium gauge Diamond Design Tread with extra long nosing for pan-filled or molded concrete steps. Not only will this 2" depth completely cover pan-filled step nosing, it adjusts from 90 degrees to 60 degrees, to accommodate stairways with return angle nosings. Makes stairways safer for handicapped. Fine for all but heaviest travelled stairways. Meets Federal Specs RR-T-650E nd ZZ-T-001237. Install with No. 400 Neoprene Contact Adhesive, both back of tread and back of nosing; Use bead of No. 110 Epoxy Stair Caulk inside where nose joins tread.
3/16" thick, tapering to back edge, 12-1/4" deep 2" adjustable square nose Smooth rear border is 5in deep A Flame Spread Rating of 75 or less using ASTM-E-84 Test Treads have a sanded back for proper adhesion. Contains no asbestos fiber Molded of top quality homogeneous rubber compound, color extending throughout thickness Free from objectionable odors, blisters, cracks or imperfections which might impair serviceability ATTN: If precise color matching is critical, contact us first for a sample Click here for installation and maintenance directions