All orders shipped via ground.
Minimum orders $40. Minimum charge for shipping and handling $20.
(Total minimum bill of $60 plus applicable sales tax)
For orders requiring rush delivery call 312-829-4673
Calculated freight charges are only estimates.
Heavy orders or orders travelling a long distance from our closest warehouse may result in additional shipping cost

Conveyor Belting

Grid  List 

per page
Set Descending Direction
  1. Style B1200 COS

    Style B1200 COS
    • Nominal OAG: .135
    • Color: Black
    • Plies: 1 ply
    • Fabric: Interwoven Polyester
    • Minimum Pulley Diameter: 3
    • Top Surface: PVC
    • Bottom Surface: Brushed
    • Compound: Oil Resistant PVC
    • Recommended Work Tensio: 120 lbs PIW
    • Elogation: Less Than 2 percent
    • Weight P.I.W. per ft: .07
    • Working Temperature: 20 Deg F to 180 Deg F
    • FDA Accepted: No
    • USDA Accepted: No
    • Joining Method: Finger or Skive/Lacing
    • Recommended Fastener: Clipper-Small/Big 2SP, 2; Alligator 7; Staple 125
    • Fabrication Key: G3

      Features:
    • This belt features the popular interwoven carcass as well as a smooth coating of oil resistant PVC top cover.
    • The Bottom surface is brushed clean to lower the coefficient of friction.
    • This belt has a plus ply which insures a flat running, easy tracking belt.
    • It offers high strength, low strech, and high lace retention.

      Applicaiton:
    • This belt is a medium duty general purpose conveyor belt that can be used in most industries.
    • Made in the USA.

    • Also available in white, call for quote.
    • Lacing quoted is steel Clipper lacing, attached to belt. Also avaiable in stainless steel lacing, call for quote.
    • Avalible in any width, call for quote.
    Learn More

  2. Style B1500 COS

    Style B1500 COS
    • Nominal OAG: .165
    • Color: Black
    • Plies: 1 ply
    • Fabric: Interwoven Polyester
    • Minimum Pulley Diameter: 3
    • Top Surface: PVC
    • Bottom Surface: Brushed
    • Compound: Oil Resistant PVC
    • Recommended Work Tensio: 150 lbs PIW
    • Elogation: Less Than 2 percent
    • Weight P.I.W. per ft: .1
    • Working Temperature: 20 Deg F to 180 Deg F
    • FDA Accepted: No
    • USDA Accepted: No
    • Joining Method: Finger or Skive/Lacing
    • Recommended Fastener: Clipper 2, 3; Aligator 15, 20; Staple 187
    • Fabrication Key: G3

      Features:
    • This belt features the popular interwoven carcass as well as a smooth coating of oil resistant pVC top cover.
    • The bottom srface is brushed clean to lower the coefficient of friction.
    • It offers high strength, tear resistance, and low stretch.
    • The belt\'s construction lends itself to high lace retention.

      Applicaiton:
    • This belt is a medium duty general purpose conveyor belt that can be used in most industries.

    • Also available in white, call for quote.
    • Lacing quoted is steel Staple lacing,attached to belt. Also avaiable in stainless steel lacing, call for quote.
    • Avalible in any width, call for quote.
    Learn More

  3. Part - 220 Style 220 1/8 x 1/16 STD

    Style 220 1/8 x 1/16 STD
    • Nominal OAG: .313
    • Color: Black
    • Plies: 2 ply
    • Fabric: 100 percent RFL/Polyester
    • Minimum Pulley Diameter: 16" Head/10" Tail
    • Top Surface: 1/8" Smooth Cover
    • Bottom Surface: 1/16" Smooth Cover
    • Compound: Abrasive Resistant SBR
    • Recommended Work Tensile: 220 lbs PIW
    • Elogation: Less Than 2 percent
    • Weight P.I.W. per ft: .153
    • Working Temperature: -40 Deg F to 250 Deg F
    • FDA Accepted: No
    • USDA Accepted: No
    • Joining Method: Lap Splice/Lacing
    • Recommended Fastener: Flexco 140; R5 Hinged; 375 Hinged
    • Fabrication Key: B2

      Features:
    • This belt features a smooth top and bottom surface.
    • The heavier cover with the high strength synthetic fabric results in long wearing, mildew and rot resistance, and low stretch belt.

      Applicaiton:
    • This belt is excellent for heavy abraseive applicaitons.
    • It is popular in the sand, gravel, rock, and many other industiral applications.

    • Lacing quoted is steel Flexco Rivit lacing, attached to belt. Also avaiable in stainless steel lacing, call for quote.
    • Avalible in any width, call for quote.
    Learn More

  4. Part - 220 Style 220 3/16 x 1/16 STD

    Style 220 3/16 x 1/16 STD
    • Nominal OAG: .375
    • Color: Black
    • Plies: 2 ply
    • Fabric: 100 percent RFL/Polyester
    • Minimum Pulley Diameter: 16" head/10" Tail
    • Top Surface: 3/16" Smooth Cover
    • Bottom Surface: 1/16" Smooth Cover
    • Compound: Abrasive resistant SBR
    • Recommended Work Tensile: 220 lbs PIW
    • Elogation:Less Than 2 percent
    • Weight P.I.W. per ft: .20
    • Working Temperature: -40 Deg F to 250 Deg F
    • FDA Accepted: No
    • USDA Accepted: No
    • Joining Method: LAP Splice/Lacing
    • Recommended Fastener: 190 Plate; R5/375 Hinged
    • Fabrication Key: B1

      Features:
    • This belt features a smoth top and bottom surface.
    • The extra heavy duty cover with a high strength synthetic fabric results in long wearing, mildew and rot resistance, and low stretch belt.

      Applicaiton:
    • This belt is excellent for heavy abrasive applications.
    • It is popular in the sand, gravel rock, and many industrial applications.

    • Lacing quoted is steel Flexco Hinged lacing, attached to belt. Also avaiable in stainless steel lacing, call for quote.
    • Avalible in any width, call for quote.
    Learn More

  5. Part - 0552-1/3-1102 Style 2 Ply Rubber Rough Top

    Style 2 Ply Rubber Rough Top
    • Nominal OAG: .250
    • Color: Black
    • Plies: 2 ply
    • Fabric: Polyester
    • Minimum Pulley Diameter: 3"
    • Top Surface: Rubber Hemp Impression
    • Bottom Surface: Bare
    • Compound: SBR
    • Recommended Work Tensio: 150 lbs. PIW
    • Elogation: Less Than 2%
    • Weight P.I.W. per ft: .11
    • Working Temperature: -40 Deg F to 250 Deg F
    • FDA Accepted: No
    • USDA Accepted: No
    • Joining Method: Lap Splice/Lacing
    • Recommended Fastener: Clipper-Small 1/Big 2SP; Alligator 15; Staple 125
    • Fabrication Key: A2

      Features:
    • This belt offers excellent gripping for standard incline conveyors.
    • The polyester carcass offers high strength and low stretch.

      Applicaiton:
    • This belt is the most popular incline belt in its product line.
    • It will handle most all products including boxed, bagged, or packaged goods.
      *Note: the rough top must be ressesed to use the recommended lacing.

    • Lacing quoted is steel Staple lacing, attached to belt. Also avaiable in stainless steel lacing, call for quote.
    • Avalible in any width, call for quote.
    Learn More

  6. Part - 8003 Skirtboard/Chute Lining - 60 Duro

    Skirtboard/Chute Lining - 60 Duro Premium Grade Skirtboard/Chute Lining

    General Properties and Applications
  7. Ideal for conveyor belt systems, mounting pads, sealing strips and general industrial/construction use.
  8. The manufacturing process guarantees consistent gauge, width and quality unlike extruded products.
  9. Packaged with three binding straps to keep rolls in tact and prevent telescoping during shipping, storage and handling.
  10. Roll sizes are clearly marked for easy identification.

    Technical Data
  11. Durometer: 60 +/-5
  12. Tensile Strength: 1,200
  13. Temperature Range: -25 Deg F to +175 Deg F
  14. Elongation: 350%
  15. Composition: Abrasion-resistant SBR/GUM
  16. ASTM Call Out: D2000-M2-AA608-BB33-EA14

    Gauge
    (in.)
    Width
    (in.)
    lbs per
    (avg.)
      Gauge
    (in.)
    Width
    (in.)
    lbs per
    (avg.)
      Gauge
    (in.)
    Width
    (in.)
    lbs per
    (avg.)
      Gauge
    (in.)
    Width
    (in.)
    lbs per
    (avg.)
    1/4 3 22 3/8 6 63 1/2 12 170 1 8 227
    1/4 4 28 3/8 8 85 3/4 3 63 1 10 283
    1/4 5 36 3/8 10 107 3/4 6 127 1 12 340
    1/4 6 43 3/8 12 128 3/4 8 170 1-1/2 10 375
    1/4 8 56 1/2 3 43 3/4 9 198
    1/4 10 71 1/2 4 56 3/4 10 215
    1/4 12 82 1/2 5 71 3/4 12 255
    3/8 3 31 1/2 6 85 1 3 85
    3/8 4 43 1/2 8 113 1 4 113
    3/8 5 53 1/2 10 141 1 6 170
    Learn More

  17. Part - 0800-25000/50000 Crown Bar Rubber

    Crown Bar Rubber
  18. Shaker Screen Protector Bucker Up Strip
    General Properties and Applications:
  19. Protects shaker screens by preventing metal-against-metal deterioration by absorbing shocks caused by materials falling on the screen.
  20. Also serves to keep the screen cloth in place.
  21. Easy-to-use boxes include 100ft of Protector.

    Technical Data:
  22. Durometer: 60 +/-5
  23. PSI: 1,300
  24. Temperature Range: -25 Deg F to +175 Deg F
  25. Composition: Abrasion-resistant SBR/GUM

  26. Minimum order is $200








    Style Part # Size A B C D E F Weight
    RT RT025 1/4" 1/4" 13/16" 3/8" 3/4"   3/16" 0.27 lb
    RT038 3/8" 3/8" 13/16" 11/32" 5/8"   3/16" 0.23 lb
    RT050 1/2" 1/2" 1" 5/16" 11/16"   3/16" 0.25 lb
    FT FT025 1/4" 1/4" 13/16" 3/8" 1/2" 9/16" 3/16" 0.26 lb
    FT038 3/8" 3/8" 7/8" 3/8" 1/2" 9/16" 3/16" 0.28 lb
    FT050 1/2" 1/2" 1-1/16" 3/8" 1/2" 9/16" 3/16" 0.33 lb
    FTH FTH025 1/4" 1/4" 1-1/8" 1/2" 5/8" 7/8"   0.46 lb
    FTH038 3/8" 3/8" 1-1/4" 1/2" 5/8" 7/8"   0.47 lb
    FTH050 1/2" 1/2" 1-1/4" 1/2" 3/4" 1"   0.48 lb
    FTH075 3/4" 3/4" 1-1/2" 5/8" 3/4" 1-1/8"   0.49 lb
    Learn More

7 Item(s)