All orders shipped via ground.
Minimum orders $40. Minimum charge for shipping and handling $20.
(Total minimum bill of $60 plus applicable sales tax)
For orders requiring rush delivery call 312-829-4673
Calculated freight charges are only estimates.
Heavy orders or orders travelling a long distance from our closest warehouse may result in additional shipping cost

Sheet Rubber- Solid or Sponge

Grid  List 

per page
Set Ascending Direction
  1. Part - 4BR607 Rubba Tape

    Rubba Tape
    • RUBBA Tape is an extremely tacky self-adhering uncured Butyl rubber material, fabric reinforced to eliminate stretching and prevent creeping or extruding in service.
    • Used in architectural designs of buildings, vehicles and water vessels as a watertight seal around windows or door frames or where metal panels are joined together. It may also be used as an anti-squeak absorption buffer or vibration eliminator in metal-to-metal applications in the building of trucks and buses.
    • During accelerated weather testing, no loss of flexibility or resiliency and no surface cracking after 1300 hours of weathering exposure.
    • Able to withstand sub-zero temperatures (-70° F) with no adverse effects.
    • Tested at 100 pphm for 72 hours at 150° F, RUBBA Tape exhibits no deterioration of material. Therefore, a very long service life under high degrees of ozone concentration is anticipated.
    • Available in 1/32" through 1/8" thicknesses and widths of 1/4" through 36". It can also be custom slit to virtually any required width.
    Learn More

  2. Part - 8029 Jar Opener Material

    Jar Opener Material
    • .050\" Thick x 48in wide x 50 yard long Rolls
    • Tolerance:.040"-.065", 48"+2"/-0
    • Roll length may be up to 2 pc
    • Minimum order is ONE roll per color
    • Delivery 1 to 4 weeks
    • FOB our factory in Connecticut
    • Pricing is per roll
    Learn More

  3. Flexible Magnetic Sheet

    Flexible Magnetic Sheet
    • Rolls are 24in. wide (actual width is 24.375in.) x 50ft

      Standard Tolerances:
    • Thickness: +/- 0.003in.
    • Width: +/- 0.030in.
    • Custom Lengths: 1% or +/- 0.060in., whichever is greater

      Magnetization and Strength:
    • Multi-pole magnetization pattern for maximum holding power of up to 144 pounds per square ft.
    • Standard grade materials are significantly stronger on one side and can have adhesives and vinyl applied to the weak side.
    • Double Magnetization is available, which will give both sides similar pull strength.

      Common Applications:
    • Vehicle Signs
    • Displays
    • Paint Masking
    • Printed Premiums
    • Control Charts
    • Arts and Crafts
    • Teaching and Educational Aids

      Added Value Servies
    • Available in a wide range of thicknesses, widths, lengths, surface laminates, custom shapes, and printed magnets.
    • Can be fabricated to your final specifications within 5 to 7 business days.

    • Key:
      -SF = Square Feet (ft2)
      -Jetmag = White Matte Printable-Jetmag, 50 pieces per pack.

    • $200 minimum order.


    Thickness


    (in.)
    Shiping
    Weight
    (lbs)
    Strength
    lbs Pull

    per ft2
    100ft2
    .0153040
    .0204860
    .0306385
    .060126144
    Learn More

  4. Part - 8160 Poly Foam - Conventional Foams

    Poly Foam - Conventional Foams
    • Material: Polyurethane
    • Color: White


    Part
    Number
    DensityFirmnessFirmness
    Type
    Quality
    CV18251.825SoftGood Grade
    CV18351.835MediumGood Grade
    CV18451.845FirmGood Grade


    • Density: weight per cubic foot.
    • Firmness: how much weight it takes to compress the foam to a certain amount (Indention Load Deflection).
    • Quality: Overall rating of the foam's qualities in relationship to its performance and durability.
    Learn More

  5. Part - 8180 Mouse Pad Material - Open Cell Sponge Sheet Rubber With Polyester One Side

    Mouse Pad Material - Open Cell Sponge Sheet Rubber With Polyester One Side
    • Width: 54
    • Prices are per roll.
    • For larger quantities, call for a quote.
    • Samples are available to verify colors.
    • Normal lead time is 4-5 weeks to ship.
    • Orders are Made to Order
    • Thicknesses marked with * are made more frequently and may be available sooner or available in quantities less than 10 roll minimum
    Learn More

  6. Part - 8180 Open Cell Sponge Sheeting - Natural Rubber - Black Roll

    Open Cell Sponge Sheeting - Natural Rubber - Black Roll
    • Prices are for a Medium density roll.
    • Temperature range: -0Deg F to +160 Deg F continuous, 200 Deg F Intermitant, 275 Deg F in some cases for very short amount of time.
    • Soft, Medium-Firm, Firm, and Xtra-Firm densities are availbe. Call us for a quote.
    • Rolls are available in a 48" width on special order.
    • Standard roll lengths are listed. Other lengths are avaible. Call us for a quote.
    • Available in metric thickness.
    • Other avaiable colors are tan and red.
    Standard Specificaiton Sheet
    Product Number3110 (Black)3120 (Black)3130 (Black)3140 (Black)3150 (Black)
    ASTM D 1056-78 DesignationRO 11 SoftRO 12 MedRO 13 Med/FrmRO 14 FirmRO 15 X-Frm
    ASTM D 1056-98 Designation1A11A21A31A41A5
    Compression Deflection 25%2-5 psi5-9 psi9-13 psi13-17 psi17-22 psi
    Density20 lbs per cubic ft Minimum22 lbs per cubic ft Minimum25 lbs per cubic ft Minimum25 lbs per cubic ft Minimum25 lbs per cubic ft Minimum
    Tensil40 lbs per square in. Minimum40 lbs per square in. Minimum40 lbs per square in. Minimum40 lbs per square in. Minimum40 lbs per square in. Minimum
    ElongationOver 200%Over 200%Over 200%Over 200%Over 200%

    Definition of Open Cell Rubber:Open-Cell songe rubber possesses an interconnected cell structure which will permit limited absorption and circulation of gasses and fluids. Outer surface of the material is continuous (rather than porous) and exhibits good physical durability. Because air can pass freely between its cells, Open-Cell sponge offers a high degree of compressibility and displays fast recovery upon release from compression. Open-Cell sponge is absorbent and should not be used where resistance to fluid penetration is required, unless protected with a surface coating.

    Learn More

  7. Part - 8165/JB0202 Silicone Sponge Sheeting 36" Wide

    Silicone Sponge Sheeting 36" Wide

    Silicone elastomers provide the maximum in reliability, whether exposed to adverse environmental contitions, stored for indefinite periods, or used under normal conditions.Resisting conditions which normally cause rubber to deteriorate, silicone rubber offers useful life which is unmatched by other known elastomers. it resists temperature extremes, ozone, corona, radiation, compression set, moisture, weathering, and chemical attack.

    • Silicone Sponge 36" Wide is priced per linear ft
    • Please order in increments of 3ft. Std sheet is 36in x 36in
    • Minimum order this line is $200.00
    • Color: Red- other colors available on special order
    • Fine fabric finish
    • Density: Medium 31/34.56 lbs/Cu ft average
    • Compression Deflection: 6-14 psi(to compress to 75% of original thickness)
    • Compression Set: 60% Max. compressed 50% for 22 hrs.@212F
    • Water Absorption: 5% Max
    • Tensile strength: 100psi min.
    • Elongation:300% min.
    • Temperature range -100 Deg F to +400 Deg F Continuous, +500 Deg F Intermittant
    • Testing in accordance with ASTM 1056
    • Applicable Specifications: Ams 3195, R46089, Mil 3133, TE7 ASTM D 1056,2D3, Mil R6130 Type 2, Grade C
    • Contact our sales department for quotes on slit or diecut parts
    • Pressure Sensitive Adhesive-Acrylic PSA) backing is available , See drop down menu
    Learn More

  8. Part - 8190-32 Sponge Weather Stripping w/ PSA- 1" Thick

    Sponge Weather Stripping w/ PSA- 1" Thick
    • Closed cell neoprene/sbr/epdm sponge weather stripping with pressure sensitive adhesive on one side.
    • Flame Rating: UL94HF-1
    • Meets ASTM-D-1056 Type 2, Class A, Grade 2
    • Meets MIL-R-6130C Type II-A
    • Density 3.0 to 6.0 lbs per cubic ft to ASTM D1622 SCE42B
    • Prices are per roll.
    • Other sizes may be available, please contact sales department for more information.
    • Due to set up costs, minimum order for weather stripping is $70.00.
    Learn More

  9. Part - 8190-24 Sponge Weather Stripping w/ PSA- 3/4" Thick

    Sponge Weather Stripping w/ PSA- 3/4" Thick
    • Closed cell neoprene/sbr/epdm sponge weather stripping with pressure sensitive adhesive on one side.
    • Flame Rating: UL94HF-1
    • Meets ASTM-D-1056 Type 2, Class A, Grade 2
    • Meets MIL-R-6130C Type II-A
    • Density 3.0 to 6.0 lbs per cubic ft to ASTM D1622 SCE42B
    • Prices are per roll.
    • Other sizes may be available, please contact sales department for more information.
    • Due to set up costs, minimum order for weather stripping is $70.00.
    Learn More

  10. Part - 8190-20 Sponge Weather Stripping w/ PSA- 5/8" Thick

    Sponge Weather Stripping w/ PSA- 5/8" Thick
    • Closed cell neoprene/sbr/epdm sponge weather stripping with pressure sensitive adhesive on one side.
    • Flame Rating: UL94HF-1
    • Meets ASTM-D-1056 Type 2, Class A, Grade 2
    • Meets MIL-R-6130C Type II-A
    • Density 3.0 to 6.0 lbs per cubic ft to ASTM D1622 SCE42B
    • Prices are per roll.
    • Other sizes may be available, please contact sales department for more information.
    • 5/8" is a non stock size. Minimum order is $300.00. Allow 3-4 weeks for delivery.
    Learn More

Items 1 to 10 of 71 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5