All orders shipped via ground.
Minimum orders $40. Minimum charge for shipping and handling $20.
(Total minimum bill of $60 plus applicable sales tax)
For orders requiring rush delivery call 312-829-4673
Calculated freight charges are only estimates.
Heavy orders or orders travelling a long distance from our closest warehouse may result in additional shipping cost

Stair Treads

Grid  List 

per page
Set Descending Direction
  1. Part - 2162-2/622 Rubber Diamond Design Stair Treads 2162-2/622

    Rubber Diamond Design Stair Treads 2162-2/622 A New Design Nose - will easily adjust and adhere to steps with return angle nosings between 90 degrees and 60 degrees; allows good fit on stairways designed for safety or aesthetics. The original molded rubber diamond design stair tread half diamond design, half smooth; with a longer adjustable nose to fit pan filled, molded concrete or terrazzo steps. Diamond design surface is 6" deep, covers impact area of pedestrian traffic. Meets Federal Specs. RR-T-650E and ZZ-T-001237(GSA-FSS). Install with Neoprene Contact Adhesive or Rubber Flooring Adhesive; use Epoxy Nose Caulk for longer wear and added safety. Improve appearance, add safety and durability, lessen traffic noise in schools, hospitals, banks, theatres, hotels, airports, restaurants, factories, malls; all heavily travelled stairways.
  2. 1/4" thick, tapering to back edge, 12-1/4" deep
  3. Smooth rear border is 5-1/2in deep
  4. 1-1/2" adjustable square nose (or curved nose)
  5. A Flame Spread Rating of 75 or less using ASTM-E-84 Test
  6. Treads have a sanded back for proper adhesion.
  7. Contains no asbestos fiber.
  8. Molded of top quality homogeneous rubber compound, color extending throughout thickness
  9. Free from objectionable odors, blisters, cracks or imperfections which might impair serviceability
  10. ATTN: If precise color matching is critical, contact us first for a sample.
  11. Curved Nose available only in Gray, Walnut, Mahogany, 40 Black, Birch, 80 Pl Black, 85 Beige and 66 Slate
  12. For 99 Peach, there is a special minimum order of 30 pieces.
  13. Click here for installation and maintenance directions
    Learn More

  14. Part - 2162-3/GS622 Molded Rubber Grit Strip Diamond Design Stair Treads 2162-3/GS622

    Molded Rubber Grit Strip Diamond Design Stair Treads 2162-3/GS622 Available with two 3/4" wide, long wearing mineral coated Grit Strips recessed the full length of the tread at impact area. Helps prevent slipping. Design surface with Grit Strips offer added safety and longer wear. All treads have color through entire thickness. All treads meet Flame Spread Rating of 75 or less using ASTM-E-84 Test.
  15. 1/4" thick; 12-1/4" deep; with 1-1/2" long adjustable square nose (or curved nose)
  16. Smooth rear border is 5-1/2in deep
  17. Two black 3/4" wide abrasive Grit Strips inlaid in tread, 1" from front edge
  18. Treads have a sanded back for proper adhesion.
  19. Contains no asbestos
  20. Molded to top quality homogeneous rubber compound
  21. Free of objectionable orders or imperfections which might impair service
  22. ATTN: If precise color matching is critical, contact us first for a sample
  23. Curved Nose available only in Gray, Walnut, Mahogany, 40 Black, Birch, 80 Pl Black, 85 Beige and 66 Slate
  24. Standard Grit Strip Insert color is black.
  25. Grit Strip Inserts are also available in Safety Yellow, Safety Red, Gray, Brown, and Beige.
  26. Click here for installation and maintenance directions
    Learn More

  27. Part - 2162-4/GS622VI Molded Rubber Visually Impaired Grit-Strip Diamond Design Stair Treads 2162-4/GS622VI

    Molded Rubber Visually Impaired Grit-Strip Diamond Design Stair Treads 2162-4/GS622VI Available with 2" wide, long wearing mineral coated Grit Strips recessed the full length of the tread at impact area. Helps prevent slipping. Design surface with Grit Strips offer added safety and longer wear. All treads have color through entire thickness. All treads meet Flame Spread Rating of 75 or less using ASTM-E-84 Test.
  28. 1/4" thick; 12-1/4" deep; with 1-1/2" long adjustable square nose (or curved nose)
  29. Smooth rear border is 5-1/2in deep
  30. One Black 2" wide abrasive Grit-Strip inlaid in tread, 1" from front edge
  31. Treads have a sanded back for proper adhesion.
  32. Contains no asbestos
  33. Molded of top quality homogenous rubber compound
  34. Free of objectionable odors or imperfections which might impair service
  35. ATTN: If precise color matching is critical, contact us first for a sample
  36. Curved Nose available only in Gray, Walnut, Mahogany, 40 Black, Birch, 80 Pl Black, 85 Beige and 66 Slate
  37. Standard Grit Strip Insert color is black.
  38. Grit Strip Inserts are also available in Safety Yellow, Safety Red, Gray, Brown, and Beige.
  39. Grit Strip Inserts are also available in GLO-Strip and Hazard-Strip Colors. Please see Parts 2074-3/Glo-Strip and 2074-3/Hazard for pricing and color descriptions on these Grit Strips.
  40. Click here for installation and maintenance directions
    Learn More

  41. Part - 2162-6/626 Rubber Diamond Design Stair Treads with 2" nose 2162-6/626

    Rubber Diamond Design Stair Treads with 2" nose 2162-6/626 A New Design Nose - will easily adjust and adhere to steps with return angle nosings between 90 degrees and 60 degrees; allows good fit on stairways designed for safety or aesthetics. Medium gauge Diamond Design Tread with extra long nosing for pan-filled or molded concrete steps. Not only will this 2" depth completely cover pan-filled step nosing, it adjusts from 90 degrees to 60 degrees, to accommodate stairways with return angle nosings. Makes stairways safer for handicapped. Fine for all but heaviest travelled stairways. Meets Federal Specs RR-T-650E nd ZZ-T-001237. Install with No. 400 Neoprene Contact Adhesive, both back of tread and back of nosing; Use bead of No. 110 Epoxy Stair Caulk inside where nose joins tread.
  42. 3/16" thick, tapering to back edge, 12-1/4" deep
  43. 2" adjustable square nose
  44. Smooth rear border is 5in deep
  45. A Flame Spread Rating of 75 or less using ASTM-E-84 Test
  46. Treads have a sanded back for proper adhesion.
  47. Contains no asbestos fiber
  48. Molded of top quality homogeneous rubber compound, color extending throughout thickness
  49. Free from objectionable odors, blisters, cracks or imperfections which might impair serviceability
  50. ATTN: If precise color matching is critical, contact us first for a sample
  51. Click here for installation and maintenance directions
    Learn More

  52. Part - 2162-7/GS626 Molded Rubber Grit Strip Diamond Design Stair Treads 2162-7/GS626

    Molded Rubber Grit Strip Diamond Design Stair Treads 2162-7/GS626 Available with 2-3/4" wide, long wearing mineral coated Grit Strips recessed the full length of the tread at impact area. Helps prevent slipping. Design surface with Grit Strips offer added safety and longer wear. All treads have color through entire thickness. All treads meet Flame Spread Rating of 75 or less using ASTM-E-84 Test.
  53. 3/16" thick; 12-1/4" deep; with 2" adjustable square nose
  54. Smooth rear border is 5in deep
  55. Two black 3/4" wide abrasive Grit Strips inlaid in tread, 1" from front edge
  56. Treads have a sanded back for proper adhesion.
  57. Contains no asbestos
  58. Molded to top quality homogeneous rubber compound
  59. Free of objectionable orders or imperfections which might impair service
  60. ATTN: If precise color matching is critical, contact us first for a sample
  61. Standard Grit Strip Insert color is black.
  62. Grit Strip Inserts are also available in Safety Yellow, Safety Red, Gray, Brown, and Beige.
  63. Click here for installation and maintenance directions
    Learn More

  64. Part - 2262-4/624-DL Diamond Design Tile 624-DL

    Diamond Design Tile 624-DL Diamond pattern design rubber floor tile, continuous field design, factory cut 24" x 24" tile; easily and quickly installed. Ideal for stair landings, entryways, hallways, lobbies, elevators, ramps, concession stands and vending machines; any heavy traffic area. Diamond design pattern matches diamond design stair treads in color, similar design. Install with marbleization in one direction.
  65. 7/32" thick, 24" x 24" factory cut tile
  66. 5.3 lbs per tile
  67. Tile shall have a continuous field pattern of 3/4" diamonds
  68. A sanded back
  69. Contains no asbestos fiber
  70. Molded of top quality homogeneous rubber compound, color extending throughout thickness
  71. Free from objectionable odors, blisters, cracks or imperfections which might impair serviceability
  72. ATTN: If precise color matching is critical, contact us first for a sample
  73. Click here for installation and maintenance directions
    Learn More
    $84.00

  74. Part - 2163-3/633 Outdoor Recycled Rubber Stair Tread

    Outdoor Recycled Rubber Stair Tread

    Our Outdoor Recycled Rubber Stair Tread is an excellent stair tread for exterior applications.

    Learn More

  75. Part - 2178-7/787 Disc-O-Tred Rubber Stair Treads 2178-7/787

    Disc-O-Tred Rubber Stair Treads 2178-7/787 A new design nose - easily adjusts to steps with angle nosings between 90 degrees and 60 degrees; allows fit on stairways designed for safety or aesthetics. Ideal for public buildings where fire-safety is a prime prerequisite; durable for heavy traffic areas. Circular discs (3/4" diameter) are easy to clean, affords safer pedestrian traffic. Meets Federal Specs. RR-T-650E. Install with No. 400 Neoprene Contact Adhesive, back of tread and back of nosing; use No. 110 Epoxy Stair Caulk inside of nose.
  76. 1/4" thick tapering to back edge; 12-1/2" deep
  77. Smooth rear border is 3in deep.
  78. Flame Spread Rating of 25 or less using ASTM-E-84 Test
  79. An adjustable square nose (1-7/8" deep)
  80. Treads have a sanded back for proper adhesion.
  81. Contains no asbestos fiber
  82. Made of top quality homogenous rubber compound, color extending throughout thickness
  83. Free from objectionable odors or imperfections which might impair serviceability
  84. ATTN: If precise color matching is critical, contact us first for a sample
  85. Click here for installation and maintenance directions
    Learn More

  86. Part - 2178-8/GS787 Rubber Disc-O-Tread Grit Strip

    Rubber Disc-O-Tread Grit Strip 1/4" thick tapering to back edge, 12-1/2" deep, with two black 3/4" wide abrasive grit-strips inlaid in tread 1" from front edge, spaced 3/4" apart.
  87. Smooth rear border is 3in deep.
  88. Flame Spread Rating of 25 or less using ASTM-E-84 Test
  89. An adjustable square nose (1-7/8" deep)
  90. Treads have a sanded back for proper adhesion.
  91. Contains no asbestos fiber
  92. Made of top quality homogenous rubber compound, color extending throughout thickness
  93. Free from objectionable odors or imperfections which might impair serviceability
  94. ATTN: If precise color matching is critical, contact us first for a sample
  95. Standard Grit Strip Insert color is black.
  96. Grit Strip Inserts are also available in Safety Yellow, Safety Red, Gray, Brown, and Beige.
  97. Click here for installation and maintenance directions
    Learn More

  98. Part - 2178-9/GS787VI Rubber Disc-O-Tread Grit Strip for Visually Impaired

    Rubber Disc-O-Tread Grit Strip for Visually Impaired 1/4" thick tapering to back edge, 12-1/2" deep, with one black 2" wide abrasive grit-strip inlaid in tread, 1" from front edge, for access by Visually Impaired.
  99. Smooth rear border is 3in deep.
  100. Flame Spread Rating of 25 or less using ASTM-E-84 Test
  101. An adjustable square nose (1-7/8" deep)
  102. Treads have a sanded back for proper adhesion.
  103. Contains no asbestos fiber
  104. Made of top quality homogenous rubber compound, color extending throughout thickness
  105. Free from objectionable odors or imperfections which might impair serviceability
  106. ATTN: If precise color matching is critical, contact us first for a sample
  107. Standard Grit Strip Insert color is black.
  108. Grit Strip Inserts are also available in Safety Yellow, Safety Red, Gray, Brown, and Beige.
  109. Grit Strip Inserts are also available in GLO-Strip and Hazard-Strip Colors. Please see Parts 2074-3/Glo-Strip and 2074-3/Hazard for pricing and color descriptions on these Grit Strips.
  110. Click here for installation and maintenance directions
    Learn More

Items 1 to 10 of 58 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5