All orders shipped via ground.
Minimum orders $40. Minimum charge for shipping and handling $25.
(Total minimum bill of $65 plus applicable sales tax)
For orders requiring rush delivery call 312-829-4673
Calculated freight charges are only estimates.
Heavy orders or orders travelling a long distance from our closest warehouse may result in additional shipping cost

Shop

Grid  List 

per page
Set Ascending Direction

  1. Part - 4074-(12458,12465) 3/4in. Contractors Water Hose CPLD M&F GHT

    3/4in. Contractors Water Hose CPLD M&F GHT
    • Not just your average rubber water hose.
    • Designed for rugged use by contractors.
    • Working pressure: 150 psi
    Learn More

  2. Part - 2090/735 ROUND RIB or V Groove Vinyl Runner Matting 735

    ROUND RIB or V Groove Vinyl Runner Matting 735 Vinyl Round Rib Matting RR

    • 1/8" Thick Chemical and Abrasion Resistant Runner Matting
    • Wide spaced rounded rib design of this vinyl runner affords easy clean up while providing sure footing and floor protection.
    • Also available in V Groove corrugation in black VG

    *Matting roll orders of 2000lbs are shipped prepaid (within continental US). Learn More

  3. Part - 2025-2/GS/130/315 GS/130/315-Ace Tuff Olefin

    GS/130/315-Ace Tuff Olefin
    • Heavy olefin mat-the very best on the market.
    • Ace Tuff Olefin is made from the finest solution-dyed,
    • 100% continuous filament olefin yarn and is bonded to a high quality non-slip vinyl backing.
    • Thickness: 3/8
    • Approximate Weight: 0.67 lbs per square foot
    • Custom sizes available for $3.19 per square foot.
    • Thicker and heavier mats are available. Call our office for additional available mats.
    Learn More

  4. Part - 2025-7/235/109 235/109-Ace Rib

    235/109-Ace Rib
    • Ace Rib is 100% Polypropylene ribbed surface bonded to a vinyl backing.
    • The two-level construction actually traps heavy traffic dirt into channels below the mat.
    • Provides outstanding performance both indoors and outdoors Learn More

    • Part - 4515-00380/F38 Center Punch Clamp Locking Tool-Ratchet Style F38

      Center Punch Clamp Locking Tool-Ratchet Style F38
      • Pre-formed style, double wrapped to slide on hose before tightening.
      • Open end style can be put around hose from side - single wrap.
      • Used to apply punch type 3/8in. and 5/8in. band clamps.
      Learn More
      $92.30

    • Part - 4515 Style F Center Punch Clamp - 3/8in. x .025in.

      Style F Center Punch Clamp - 3/8in. x .025in.
      • Pre-formed
      • Galvanized steel or Stainless.
      • Prices per each.
      • Only sold in box quantities of 100 per box.
      • Prices are listed per each.
      • Parts with FS in number are 300 series stainless steel with 302 Stainless buckles
      • Quantity discounts available, call for quote.
      Learn More

    • Part - 4515 Style F Center Punch Clamp - 5/8in. x .025in.

      Style F Center Punch Clamp - 5/8in. x .025in.
      • Pre-formed
      • Galvanized steel or Stainless Steel.
      • Only sold in box quantities of 100 per box.
      • Prices are listed per each.
      • Parts with FS in number are 300 series stainless steel with 302 Stainless buckles
      • Quantity discounts available, call for quote.
      Learn More

    • Part - 4515 Style F Center Punch Clamp - 5/8in. x .031in.

      Style F Center Punch Clamp - 5/8in. x .031in.
      • Pre-formed
      • Galvanized steel or Stainless Steel.
      • Sold in box quantities only.
        -F6 thru F9: 100 per box.
        -F10 thru F14: 50 per box.
        -F16 thru F32: 25 per box.
      • Prices per each.
      • Parts with FS in number are 300 series stainless steel with 302 Stainless buckles
      • Quantity discounts available, call for quote.
      Learn More

    • Part - 4585 Style HS Clamps - 1/2" Band Width

      Style HS Clamps - 1/2" Band Width
      • Band and Housing: SAE 201/301 Series Stainless
      • Screw: SAE 1018 case-hardened, hex-free chrome zinc-plated steel.
      • Meets SAEJ1508 (supercedes Mill Spec WW-C-4408).
      • All clamps come 10 per box.
      • Prices are per each.
      • Quantity discounts available, call for quote.
      Learn More

    • Part - 4585 Style HS Clamps - 9/16" Band Width

      Style HS Clamps - 9/16" Band Width
      • Band and Housing: SAE 201/301 Series Stainless
      • Screw: SAE 1018 case-hardened, hex-free chrome zinc-plated steel.
      • Meets SAEJ1508 (supercedes Mill Spec WW-C-4408).
      • All clamps come 10 per box.
      • Prices are per each.
      • Quantity discounts available, call for quote.
      Learn More

Items 1 to 10 of 892 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Browse By

Filter

  1. Agricultural Fittings (34)
  2. Air Brake Fittings and Hose (12)
  3. Automotive Hoses and Accessories (43)
  4. Bulk Material Hose (8)
  5. Chemical and Fuel Hose (12)
  6. Composite Hoses (12)
  7. Contractors Hoses (81)
  8. Contractors Items (16)
  9. Conveyor Belting (7)
  10. Ducting (58)
  11. Expansion Joints (4)
  12. Fire Hose and Accessories (35)
  13. Food Grade Hose (15)
  14. Footwear and Clothing (16)
  15. Hose Attachments (120)
  16. Hydraulic Hose and Fittings (115)
  17. Industrial Hoses (36)
  18. Marine Hose (16)
  19. Mats (27)
  20. Molded Rubber Parts (44)
  21. O-Rings (17)
  22. Pipe Fittings and Adapters (49)
  23. Push-On Couplings and Hose (18)
  24. Rubber Cord (20)
  25. Sheet Rubber- Solid or Sponge (73)
  26. Stair Treads (58)
  27. Tubing (50)
  28. V-Belts (24)
  29. KLAMPz brand grooved fittings and clamps (6)
COMPANY QUICK LINKS ACCOUNT
   
Ace Hose & Rubber Company
701 S Olive Ave Unit 802 West Palm Beach, FL 33401, USA
Leaders in the industry since 1943 Phone: 312-829-4673           Fax: 312-850-4673