All orders shipped via ground.
Minimum orders $40. Minimum charge for shipping and handling $25.
(Total minimum bill of $65 plus applicable sales tax)
For orders requiring rush delivery call 312-829-4673
Calculated freight charges are only estimates.
Heavy orders or orders travelling a long distance from our closest warehouse may result in additional shipping cost

Shop

Grid  List 

per page
Set Ascending Direction
  1. Part - 4097/1320 Special Purpose Hose - Steam Cleaner Hose Assembly

    Special Purpose Hose - Steam Cleaner Hose Assembly
    • Tube specially compounded for resistance to cleaning agents and detergents.
    • Reinforced with braided steel wire.
    • Black heat and oil resistant cover.
    • Medium pressure, flexible hose for steam cleaning operations and saturated steam use to 325 Deg F.
    • Assembly includes steel males attached with 2-bolt clamps.
    Learn More

  2. Part - 4079/2015 Special Purpose Hose - Airless Paint Spray Hose Assembly

    Special Purpose Hose - Airless Paint Spray Hose Assembly
    • Nylon tube, chemical and solvent resistant.
    • Polyester reinforcement and Polyurethane cover.
    • Dissipates static charge.
    • Assembly includes IPT female couplings and spring guards.
    • Lightweight and flexible static conductive hose for airlesspaint spray.
    • Temperature range 0 Deg F to 200 Deg F.
    Learn More

  3. Part - 4088/1660/5300N Special Purpose Hose - Sand Blast Hose

    Special Purpose Hose - Sand Blast Hose
    • 1/4" thick abrasion resistant static-conducting tube.
    • Reinforced with spiral polyester cord.
    • Black abrasion resistant rubber cover.
    • For conducting sand, steel, shot or other sharp abrasives at high velocity.
    • All hoses are 2-braid with 150# of pressure.

      Available in 25ft, 50ft, or 100ft lengths only.
    Learn More

  4. Part - 4027/1670 Special Purpose Hose - Plaster/Grout Hose

    Special Purpose Hose - Plaster/Grout Hose
    • Black abrasion resistant SBR rubber tube, spiral plies of high-strength polyester.
    • Cover is abrasion and ozoneresistant rubber.
    • Couplings are internally expanded steel, Victaulic or IPT - please specify below.
    • Heavy duty plaster andgrout, or cement discharge hose.
    • Easy to handle and kink resistant.
    • All hoses work at 800# of pressure except 4" ID.

      Available in 50ft or 100 ft lengths only.

      IPT
      California
      Victaulic
    Learn More

  5. Part - 4088-2/1675/5786N Special Purpose Hose - Gunite Hose

    Special Purpose Hose - Gunite Hose
      • Black Gum rubber tube reinforced with high tensile cord.
      • Non-marking yellow cover and an imbedded static wire.
      • Couplings are internally expanded steel, Victaulic or IPT - please specify below.
      • Designed for pumping dry sand and cement.
      • All hoses work at 150# of pressure.

        Available in 50ft or 100ft lengths only.
    IPT
    California
    Victaulic
    Learn More

  6. Part - 4094/1810 Special Purpose Hose - Plastic Vacuum Hose- Super Vacuflex

    Special Purpose Hose - Plastic Vacuum Hose- Super Vacuflex
  7. Heavy duty plastic hose for air, gases, dust, fumes and liquid by suction, gravity or pressure.
  8. Max Vacuum for 1-1/4" and 1-1/2", size 29 in/Hg
  9. Max Vacuum for 2", size 20 in/Hg
  10. Maximum length of 50ft.
  11. Smooth vinyl screw on cuffs available.
  12. The Super Vac-U-Flex was designed to offer maximum flexibility and strength while providing an aesthetically appealing and unique construction. The hose consists of a coated wire helix with a single ply cover. Polyester reinforcing yarns are laid longitudinally and radially to provide additional strength. A second ply of material is extruded over the yarns and inner cover. This construction offers excellent helix-to-cover adhesion and a smooth interior for superior air flow characteristics. Available in a wide range of colors, internal diameters (1 ¼” – 6”) and in lengths up to 50’. Molded-on end fittings that are fused together to create an airtight seal are available as well as the standard screw-on type end fittings. Learn More

  13. Part - 4096/2050A Special Purpose Hose - Twin Welding Hose Assembly

    Special Purpose Hose - Twin Welding Hose Assembly
    • One line red and one green bonded together for easy handling.
    • Coupled with 9/16-18 Type "B" females both ends.
    • Green Oxygen hose has right hand thread
    • Red Acetylene hose has left hand thread (notch on nut)
    • Dual-line hose for oxygen acetylene service.
    • Meets RMA spec. Type VD, Grade R.
    • These are 1-braid with 200# of pressure.
    Learn More

  14. Part - 4035/2582 Special Purpose Hose - Ventilation & Blower Duct Hose

    Special Purpose Hose - Ventilation & Blower Duct Hose
    • Expanded wire pitch for excellent compressibility and minimum storage.
    • Yellow PVC impregnated polyester Ducting with a black wear strip.
    • Standard lengths supplied with plain cut ends.
    • Used with portable blowers and heaters, ventilation and fume removal equipment.
    • Temperature range -20 Deg F to 180 Deg F.

      Available in standard lengths of 15ft or 25ft.
    Learn More

  15. Part - 2876/UPL Couplings and Accessories - In-Line Lubricators

    Couplings and Accessories - In-Line Lubricators
    • Aluminum
    • Lubricator kits with hose whips available upon request
    • See Kits


    • Part #NPT
      Size
      Oil CapacityMax
      Pressure
      Air Flow
      PL3001/21.4 oz500 PSI30 SCFM
      PL4003/43.7 oz200 PSI70 SCFM
      PL400L3/411.0 oz300 PSI70 SCFM
      PL500116.0 oz250 PSI100 SCFM
      Max working pressureat ambient temperature of 70°F.
      Air flow at 70 PSI.
      Learn More

    • Part - 4580/W Couplings and Accessories - Safety Whip-Check Cables

      Couplings and Accessories - Safety Whip-Check Cables
      Incorrect InstallationCorrect Installation

       

      • When hose, couplings or clamps fail, or there is an accidental separation of the assembly, safety cables minimize damage to equipment and injuries to operators.
      • Safety cable reaches across the hose fittings to provide standby safety for hose. Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose.
      • Thoroughly tested with years of service. A positive safeguard for air hose connections - helps you meet today's safety standards. Safety cable must be installed in the extended position (no slack).
      • Hose to hose service or hose to tool service.
      • Highly resistant to rust and corrosion.
      • No tools needed - easy to install and remove.
      • Maximum Pressure: 200 PSI
      • Cables are shipped with safety restraint labels attached. Labels are not pictured.

        Hose to Tool
          Hose to Hose
        Part
        Number
        Hose ID
        (in.)
        Cable
        (in.)
        Length
        (in.)
        Max. Work.
        Press. (PSI)
        Part
        Number
        Hose ID
        (in.)
        Cable
        (in.)
        Length
        (in.)
        Max. Work.
        Press. (PSI)
        WSR1 1/2 - 1-1/4 1/8 20-1/4 200 WB1 1/2 - 1-1/4 1/8 20-1/4 200
        WSR3 1/2 - 2 3/16 28 200 WB3 1/2 - 2 3/16 28 200
        WSR2 1-1/2 - 3 1/4 38 200 WA2 1-1/2 - 3 1/4 38-1/4 200
        WSR4 4 3/8 44 200 WA4 4 3/8 44 200
      Learn More

Items 51 to 60 of 891 total

Page:
  1. 4
  2. 5
  3. 6
  4. 7
  5. 8